Specifications

Total Access 600 Series System Manual Section 4.4 ADSL ATM UIG
61200624L1-1A © 2002 ADTRAN, Inc. 247
6.
Select CONFIGURATION.
From the CONFIGURATION menu, you will set up addresses for your LAN
and WAN.
For basic IP routing, use all the default values from the GLOBAL menu.
7.
From the ETHERNET menu, enter the IP menu to enter your LAN
configuration.
8.
Enter your LAN IP ADDRESS, SUBNET MASK, and DEFAULT GATEWAY
information.
For this example, the IP ADDRESS is 192.168.1.2, the SUBNET MASK is
255.255.255.0, and the DEFAULT GATEWAY is 10.25.4.10.
9.
Arrow back to the main ROUTER CONFIGURATION menu, and select the
WAN menu and then the ATM menu. (Here you will enter your data
PVC information.)
10.
Create a new PVC by entering the menu. Enter your VPI and VCI
values.
11.
From the RFC1483 IP menu, enter your LAN information.
For this example, the FAR END IP ADDRESS is 10.25.4.9, the IP
NETMASK is 255.255.255.252, and the LOCAL IP ADDRESS is 10.25.4.10.
12.
Arrow back to the top level Total Access 600 menu to activate your
changes.
IP Routing