Specifications

Total Access 600 Series System Manual Section 4.4 ADSL ATM UIG
61200624L1-1A © 2002 ADTRAN, Inc. 231
• Route/Hops (1-16)
This value is the metric or number of hops that RIP will use in advertising the static route. The range is
1 to 16, where 1 is the default. The value 16 is considered an infinite distance (poisoned route).
• Route/Force IP
When set to YES, the Total Access 600 will force the PPP peer to use the IP address in the LOCAL IP for
this profile as its WAN IP address. Normally this is set in the
NO (def) position.
RIP
The RIP parameters can be adjusted from their defaults under this menu.
•Mode
The Total Access 600 performs RIP over the WAN connection when this is set to ON (def).
•Protocol
The Total Access 600 performs version 1, V1 (def), or version 2, V2, of RIP on this WAN connection.
•Method
• Direction
• Triggered
When set to YES, only IP RIP updates are sent when the routing table has changed and learned routes are
not "aged." When set to
NO (def), updates are sent periodically.
• Retain
When this Connection List entry is disconnected and this parameter is set to YES, all routes learned from
this WAN connection are retained and their routing interface is set to idle.
PPP
The Total Access 600 supports the IETF standards for the Point-to-Point Protocol. The PPP state
machine running in the Total Access 600 can be fine-tuned to support many applications that can be
employed. The configurable items under this menu can be changed from their default values for special
cases.
VJ Compression
When this item is set to ON, the Total Access 600 will perform TCP/IP header compression known as
Van Jacobson compression to the PPP peer.
SPLIT HORIZON
Only routes not learned on the WAN
connection are advertised.
POISON REVERSE
(def)
All routes are advertised, including routes
learned from the WAN connection. These
routes are poisoned.
NONE
All routes are advertised, including routes
learned from the WAN connection. No
attempt is made to poison these routes.
TX AND RX (def)
RIP advertisements are transmitted and
listened to on the WAN connection.
TX ONLY
RIP advertisements are transmitted and not
listened to.
RX ONLY
RIP advertisements are listened to but not
transmitted.