Specifications

Total Access 600 Series System Manual Section 4.4 ADSL ATM UIG
61200624L1-1A © 2002 ADTRAN, Inc. 211
Level
This is the security level granted to the user.
>Maint Port Menu
The Total Access 600’s VT 100
CRAFT port can be accessed via an RJ-48 located on the rear panel. The
setup for these ports is under this menu.
Password Protect
When set to NO, the maintenance port is not password protected. When YES (def), the Total Access 600 will
prompt for a password upon startup.
Password
This is the text string that is used for comparison when password protecting the maintenance port. By
default, no password is entered.
If you forget your password, type CHALLENGE in all capital letters. Call technical
support and have the displayed CHALLENGE code ready.
The security level for the maintenance port is always set to 0. This gives full access to all
menus.
Passwords are case-sensitive.
Instructions for Changing Passwords
Step Action
1.
Select the PASSWORD field—a new PASSWORD field displays.
2.
Type the new password in the ENTER field.
3.
Type the new password again in the CONFIRM field.
The password can contain up to 12 alphanumeric characters.
You can also use spaces and special characters in the
password.