Specifications

Section 4.3 T1 ATM UIG Total Access 600 Series System Manual
192 © 2002 ADTRAN, Inc. 61200624L1-1A
Voice Turn Up
Step Action
1.
From the Total Access 600 main menu, select the WAN menu. (Here
you set up the ATM network.)
2.
Select the ATM CONFIG menu.
3.
Enter the IDLE CELLS format for your network.
4.
Set DATA SCRAMBLING appropriately for your network.
5.
Back all the way out to the top level Total Access 600 menu, and then
select the V
OICE menu. (From this menu, the appropriate Voice
information for working with the Voice Gateway is entered.)
6.
Select CONFIG, and from the CONFIG menu, enter the Gateway type
under CALL CONTROL and enter the VPI and VCI values for
communicating with that Gateway.
CALL CONTROL should be set to the Gateway type and the VPI and VCI
values should be set appropriately for your network.
7.
To verify correct setup, use the STATUS menu (under the VOICE menu)
to look at the current status of the voice connection.
Under STATUS, you can view the GATEWAY STATS and information
about the voice PVC along with information about the POTs ports
available on the Gateway.
The G
ATEWAY STATS menu should show the Gateway Link is up (if
everything is configured correctly).
A visual inspection of the VOICE LED on the front panel will also yield
the status. Green = up. Red = Down.