Specifications

Section 4.3 T1 ATM UIG Total Access 600 Series System Manual

LAN-TO-WAN (Out)

The packets which come out toward the WAN from the TA600 can be filtered in three ways:

Out Exceptions

This is a list of up to 32 filter entries. The setup is exactly the same as the FILTERS/IN EXCEPTIONS list.

Configuring the Router – Status

Use the ROUTER/STATUS menu to view and set the parameters shown in Figure 13. The ROUTER/STATUS

screens give the user useful information for debugging the current routes in the 600.

Figure 13. Router/Status Menu

>Session

This menu maintains statistics about the active ATM PVCs.

>ARP cache

This is a listing of the currently connected Ethernet port on the LAN.

>Bridge Table

This shows the detected MAC addresses and the interface to which they are associated.

AND

logically AND this filter with the next filter in

the list.

logically OR this filter with the next filter in the

list.

DISABLED (def)

Turns off packet input filtering. No outgoing

packets are blocked.

BLOCK ALL

All outgoing packets to the WAN are blocked

except as defined in the

FILTERS/OUT EXCEPTIONS

list.

FORWARD ALL

All outgoing packets to the WAN are not blocked

except as defined in the

FILTERS/OUT EXCEPTIONS

list.