Specifications

Section 4.3 T1 ATM UIG Total Access 600 Series System Manual
172 © 2002 ADTRAN, Inc. 61200624L1-1A
>Ethernet
Use the ETHERNET menu (Figure 11) to configure the Ethernet port on the 600.
Figure 11. Ethernet Menu
IP
This is used to set up the IP addresses for the LAN on the 600
IP Address
The IP address assigned to the 600's Ethernet port is set here. This address must be unique within the
network.
Subnet Mask
This is the IP network mask that is to be applied to the 600's Ethernet port.
Default Gateway
The default gateway is used by the 600 to send IP packets whose destination address is not found in the
route table.
No - only when TCP not established
Ignore - ignore TCP flags