Specifications

Total Access 600 Series System Manual Section 4.3 T1 ATM UIG
61200624L1-1A © 2002 ADTRAN, Inc. 167
Configuring the Router – Configuration
Use the ROUTER/CONFIGURATION menu (Figure 9) to access the GLOBAL, ETHERNET, and WAN menus.
Figure 9. Router/Configuration Menu
>Global
Use the GLOBAL menu (Figure 10) to set up general router functions.
Figure 10. Global Menu
IP
This is used for general IP configuration.
Mode
This item controls how the 600 handles IP routes. When this option is set to O
N (def), the 600 will
advertise and listen to routes from other IP routers. If O
FF, the route table is still used, but only static
routes are used for routing IP packets and only the Ethernet port is used. IP packets can be sent over the
WAN, but only when bridged.
Static Routes
Use this menu to enter static routes to other networks.