Specifications

Section 4.3 T1 ATM UIG Total Access 600 Series System Manual
164 © 2002 ADTRAN, Inc. 61200624L1-1A
Figure 7. ATM Config Menu
Idle Cells
The I
DLE CELLS format must be configured for either ATM FORUM or ITU. Configuring this setting incor-
rectly for a particular circuit will cause poor performance at the ATM layer.
Data Scrambling
D
ATA SCRAMBLING can be ENABLED or DISABLED for cell traffic. Configuring this setting incorrectly for a
particular circuit will cause poor performance at the ATM layer.
>ATM Stats
Use the W
AN menu (Figure 6 on page 163) to access the ATM STATS menu (Figure 8) and view the
parameters listed below the figure.
This setting must match the configuration setting of the ATM switch or DSLAM at the other
end of the circuit.
This setting must match the configuration setting of the ATM switch or DSLAM at the other
end of the circuit.