Specifications

Total Access 600 Series System Manual Section 4.3 T1 ATM UIG
61200624L1-1A © 2002 ADTRAN, Inc. 161
Start Transfer
This activator is used when the configurable items in this menu are complete.
Abort Transfer
Use this activator to cancel any TFTP transfer in progress.
>Config Transfer
Used only with TFTP transfers. Sends a file containing the Total Access 600 configuration to a file on a
TFTP server using the TFTP protocol. C
ONFIG TRANSFER also lets you save the Total Access 600
configuration as a backup file, so you can use the same configuration with multiple Total Access 600 units.
In addition, C
ONFIG TRANSFER can retrieve a configuration file from a TFTP server.
To support these transfers, ADTRAN delivers a TFTP program with the Total Access 600 called
TFTP Server. You can configure any PC running Microsoft Windows with this software, and store a
configuration file. See DLP-008, Upgrading the Firmware Using TFTP for details on how to use TFTP
Server.
Only one configuration transfer session (upload or download) can be active at a time.
Transfer Method
Displays the method used to transfer the configuration file to or from a server. Currently, you must use
TFTP.
Transfer Type
Only B
INARY transfers are currently supported.
TFTP Server IP Address
Specifies the IP address of the TFTP server. Get this number from your system administrator.
TFTP Server Filename
Defines the name of the configuration file that you transfer to or retrieve from the TFTP server. The default
name is
Total Access 600.cfg, but you can edit this name.
Current Transfer Status
Indicates the current status of the update.
Before using START TRANSFER, the Total Access 600 should have a valid IP address,
subnet mask, and default gateway (if required).
Before using CONFIG TRANSFER, the Total Access 600 should have a valid IP address,
subnet mask, and default gateway (if required).