Specifications

Section 4.2 T1 TDM UIG Total Access 600 Series System Manual
134 © 2002 ADTRAN, Inc. 61200624L1-1A
ACTIVE
Turns this entry active when set to YES. Default is NO.
T
YPE
Selects the filter define list to reference (default is MAC):
MAC
from the SECURITY > FILTERS > FILTER DEFINES > MAC FILTER
D
EFINES list.
PATTERN
from the SECURITY > FILTERS > FILTER DEFINES > PATTERN
F
ILTER DEFINES list.
IP
from the SECURITY > FILTERS > FILTER DEFINES > IP FILTER
D
EFINES list.
FILTER LIST NAME
Selects between filters defined in the list. Default is no entry in filter list name.
NEXT OPER
The next operation to use to combine with the next filter in the list (default is END):
END
the last filter to combination.
AND
logically AND this filter with the next filter in the list.
OR
logically OR this filter with the next filter in the list.
OUT TO VC
The packets which come from the unit to the WAN can be filtered in three ways:
DISABLE (DEF)
Turns off packet output filtering. No outgoing packets are
blocked.
BLOCK ALL
All outgoing packets to the WAN are blocked except as defined
in the
SECURITY > FILTERS > INTERFACES > SETUP > OUT
E
XCEPTIONS list.
FORWARD ALL
All outgoing packets to the WAN are not blocked except as
defined in the
SECURITY > FILTERS > INTERFACES > SETUP >
O
UT EXCEPTIONS list.