Specifications

Total Access 600 Series System Manual Section 4.2 T1 TDM UIG

ROUTER > CONFIG > DHCP SERVER > DHCP RENEWAL TIME (HOURS)

The number of hours that the DHCP server should allow the device to keep its previous IP assignment,

before it is required to send a new DHCP request. The default is

0 HOURS which represents an infinite

lease.

ROUTER > CONFIG > DHCP SERVER > DOMAIN NAME

Text string used to represent the domain name used by the unit.

ROUTER > CONFIG > DHCP SERVER > PRIMARY DNS

First server to which domain name requests are sent.

ROUTER > CONFIG > DHCP SERVER > SECONDARY DNS

Server used as a backup, in case the primary address does not respond to the request.

ROUTER > CONFIG > DHCP SERVER > PRIMARY NBNS/WINS

Primary address of the NBNS/WINS server.

ROUTER > CONFIG > DHCP SERVER > SECONDARY NBNS/WINS

Secondary address of the NBNS/WINS server.

ROUTER > CONFIG > UDP RELAY

This menu configures the unit to act as a UDP relay agent for applications requiring a response from UDP

hosts that are not on the same network segment as their clients.

ROUTER > CONFIG > UDP RELAY > MODE

When this option is set to ON, the unit will act as a relay agent. Default is OFF.

ROUTER > CONFIG > UDP RELAY > UDP RELAY LIST

Up to four relay destination servers can be specified in this list.

Indicates the entry number in the UDP Relay List table.

RELAY ADDRESS

This is the IP address of the server that will receive the relay packet. Default is 0.0.0.0.