Specifications

16
www.adtran.com/router
Delivering a variety of modules to support
a breadth of network applications.
Network Interface and Dial Backup Modules
A Flexible, Modular Platform
Access slots in each NetVanta chassis support a
variety of NetVanta Network Interface Modules
(NIMs), Dial Backup Interface Modules (DIMs)
or Wide Modules to terminate the wide
area connection.
Network Interface Modules (NIMs)
E1/FE1Terminates a full E1 or a fractional E1
for Frame Relay or PPP networks
E1/FE1 + G.703—Offers a full E1 or fractional
E1 interface, plus an additional G.703 interface
to drop-off voice traffic to a PBX
ADSL—Supports ADSL over POTS (Annex A
and Annex B),
including ADSL2 and ADSL2+ at
rates up to 25Mbps
SHDSL—Terminates a single 200 kbps
to 2312 kbps G.991.2 SHDSL link for Frame
Relay or PPP networks.
SerialSupports a V.35, EIA-530, or X.21 (V.11)
interface for synchronous operations up to
4Mbps
3G—Supports 3G CDMA cellular service from
Verizon and Sprint, and can be used as a primary
WAN connection, or as a backup/disaster
recovery link.*
T1/FT1Terminates a full T1 or a fractional
T1 for Frame Relay or PPP networks
T1/FT1+ DSX-1—Offers full T1 or fractional
T1 interface, plus an additional DSX-1 interface to
drop-off voice traffic to a PBX
Dual T1—Terminates two individual T1s/FT1s or
two T1s aggregated together using Multilink PPP
or Multilink Frame Relay
56/64 kbps—A WAN interface for a single 56k
or 64k Digital Data System (DDS) network
Dial Backup Interface Modules (DIMs)
ISDN BRI S/TRestoral via Euro-ISDN at 64 kbps
ISDN BRI U—Restoral via the PSTN at 64 kbps
Analog Modem—V.90 restoral and remote
dial-in configuration and management
Wide Modules
Octal T1/E1Terminates up to eight individual
T1/E1s, or up to eight T1/E1s aggregated using
Multilink PPP or Multilink Frame Relay
Unchannelized T3—Provides BNC interfaces
for a single unchannelized T3
HSSI—Provides a single, high-speed serial
interface with rates up to 44.2 Mbps
Dial Backup Interface Modules (DIMs)
A single NetVanta NIM slot can house both a NIM
and DIM together. The NetVanta NIM is a plug-in
form factor and can carry a NetVanta DIM, which
is a plug-on form factor to the NIM. The NetVanta
wide modules are supported in the NetVanta 4305
and 5305. Both modules are field installable and
remotely configurable.
NetVanta Wide Module
NetVanta 3G NIM
NetVanta NIM and DIM
*Supported router platform dependent on carrier service.