User's Manual

NetVanta 150 Wireless Access Point ABG Hardware Installation Guide FCC Compliance Notice: Radio

FCC Compliance Notice: Radio Frequency Notice

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference. 2. This device must accept any interference received,

including interference that may cause undesired operation.

Placement and Range Guidelines

The maximum indoor range for 802.11b devices is 500 feet (152.4m). However, the physical placement of

your wireless access point (WAP) can affect the operating range of the unit. When determing the

placement of your WAP, consider the following guidelines to avoid significant performance degradation or

inability to wirelessly connect to the WAP:

• Place the WAP away from potential sources of interference, such as PCs, large metal surfaces,

microwaves, and 2.4 GHz cordless phones.

• Place the WAP in an elevated location such as a high shelf that is near the center of the wireless

coverage area for all mobile devices.

RF Exposure Warning for North America, and Australia

To meet FCC and other national safety guidelines for RF exposure, the antennas for

this device must be installed with a minimum separation distance of 7.9in (20cm)

from any person. The antennas shall not be colocated with other antenna or radio

transmitter.

You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your

authority to operate the equipment.

According to FCC 15.407(e), the device is intended to operate in the frequency band of 5.15GHz to 5.25GHz under all conditions

of normal operation. Normal operation of this device is restricted to indoor used only to reduce any potential for harmful interference

to co-channel MSS operations.