User's Manual

Introduction to the NetVanta Solution NetVanta 150 Wireless Access Point ABG Hardware Installation

Features and Specifications

The following list highlights the major features of the NetVanta 150 unit.

• IEEE 802.11a Wireless

• IEEE 802.11b/g Wireless

• Concurrent 802.11a and 802.11 b/g connections

• Two rear-panel dual-band RP-SMA detachable antennas

• One 10/100 Base T Ethernet interface

• 802.3af POE support

• WEP/WPA/WPA2 Wireless Security

• Four front-panel LED indicators

• One rear-panel Reset switch

• Supports 802.11h

• Supports 802.11j

• Supports draft IEEE 802.11e WMM QoS

• WMM Wi-Fi certified

• Hardware encryption support for the Wi-Fi Protected Access (WPA) and IEEE 802.11i security

specifications provides Advanced Encryption Standard (AES), Temporal Key Integrity Protocol (TKIP)

and WEP without performance degradation

• For product available in USA & Canada, only channel 1-11 can be operated of 2412-2462 MHz &

• Frequency Range:

IEEE 802.11a: 5.150~5.350 GHz

5.745~5.825GHz

Turbo mode: 5.760GHz/ 5.800GHz

IEEE 802.11b/g : 2.412~2.462 GHz

IEEE 802.11g Turbo : 2.437 GHz

• Dynamic Frequency Selection/Transmit Power Control (DFS/TPC) for international operation

Environmental

• Operating Temperature: 32°F to 122°F (0°C to 50°C)

• Storage/Transport Temperature: 68°F to 185°F (20°C to 85°C)

• Humidity: Up to 95% non-condensing



This hardware installation guide describes the NetVanta 150, details basic functionality, gives installation 

instructions, and lists unit specifications. For more information on router configuration for a specific 

application, refer to the quick configuration documents provided on the ADTRAN website at

www.adtran.com. For details on the command line interface, refer to the Command Reference Guide, also

on the website.

will be limited to transmit in 5180 - 5240 MHz only by firmware control.