Installation guide
Installing Management Components NetVanta 2000 Series Hardware Installation Guide
32 © 2004 ADTRAN, Inc. 61202361L2-34B
Microsoft Windows 2000
®
or Windows XP
®
1. In Windows 2000, follow the menu path START>SETTINGS>CONTROL PANEL. In Windows XP, the
path may be
START>CONTROL PANEL, depending on your local settings.
2. After the
CONTROL PANEL opens, double-click the NETWORK AND DIALUP CONNECTIONS (NETWORK
C
ONNECTIONS in Windows XP) icon to display the existing network connections.
3. After the
NETWORK AND DIALUP CONNECTIONS (or NETWORK CONNECTIONS) open, double-click on
the icon representing the local area connection.
4. After the local area connection
STATUS window opens, click the PROPERTIES button.
5. After the local area connection
PROPERTIES window opens, select the INTERNET PROTOCOL
(TCP/IP)
component, and click the PROPERTIES button.
6. Continue with one of the following options:
7. Click
OK to close the INTERNET PROTOCOL (TCP/IP) PROPERTIES window.
8. Click
OK to close the local area connection PROPERTIES window.
9. Close the
NETWORK AND DIALUP CONNECTIONS (or NETWORK CONNECTIONS) window.
10. Close the
CONTROL PANEL window.
Microsoft Windows NT
®
or Windows 98/95
®
1. In Windows, follow the menu path START>SETTINGS>CONTROL PANEL.
2. After the
CONTROL PANEL opens, double-click the NETWORK icon to display the existing network
configuration.
3. Select
TCP/IP from the list of installed network components. If there are multiple sessions, select
the one for the Ethernet card in the host computer.
4. Click
PROPERTIES, which shows, in a multi-paned window, the existing properties of the TCP/IP
protocol running on the host computer.
5. Select the
IP ADDRESS pane by clicking on it.
Set the IP Address Yourself OR Use DHCP to Assign an IP Address
• Wait for the INTERNET PROTOCOL (TCP/IP)
P
ROPERTIES window to display.
• Select the
USE THE FOLLOWING IP ADDRESS
radio button.
• Enter the IP address as:
10.10.10.50.
• Enter the Subnet mask as:
255.255.255.0.
• Enter the Default gateway as:
10.10.10.1.
• Wait for the INTERNET PROTOCOL (TCP/IP)
P
ROPERTIES window to display.
• Select the
OBTAIN AN IP ADDRESS
A
UTOMATICALLY radio button.
If your network uses DHCP for dynamic IP addressing, remember to return the TCP/IP
properties of your computer back to dynamic IP addressing after completing your
installation.