Installation guide

NetVanta 2000 Series Hardware Installation Guide Unit Installation
61202361L2-34B © 2004 ADTRAN, Inc. 25
3. UNIT INSTALLATION
The instructions and guidelines provided in this section cover hardware installation topics. These
instructions are presented as follows:
• Wallmounting NetVanta 2000 Series Internet Security Appliances on page 26
• Rackmounting NetVanta 2000 Series Internet Security Appliances on page 28
• Supplying Power to the Unit on page 29
For information on router configuration for a specific application, refer to the quick start documents
provided on your ADTRAN OS Documentation CD. For details on the command line interface, refer to the
AOS Command Reference Guide (also included on your CD).
Tools Required
The customer-provided tools required for the hardware installation of the NetVanta 2000 Series are as
follows:
• UTP Ethernet cable to connect unit to existing network
• Phillips-head screwdriver (rackmounting and wallmounting applications only)
• Internet Browser for configuring the unit using the GUI
Mounting Options
The NetVanta 2050, NetVanta 2054, and NetVanta 2100 may be installed in a wallmount or tabletop
configuration. The NetVanta 2300 and NetVanta 2400 may be installed in a tabletop, wallmount, or
19-inch rackmount configuration. The following sections provide step-by-step instructions for
wallmounting and rackmounting.
To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm.
To access the command line interface (CLI) of the NetVanta 2000 Series, you will also need
a VT100 terminal or PC with terminal emulation software and a console port cable.
Instructions on how to access the CLI are given in the AOS Command Reference Guide
(provided on the ADTRAN OS Documentation CD).