Installation guide

Introduction NetVanta 2000 Series Hardware Installation Guide

Administration

• Command Line Interface

• Web-based management - Provides a GUI for configuring the NetVanta 2000 Series

• Syslog logging in WELF format

• E-mail alerts (SMTP) - For when programmed thresholds are reached

DHCP (Dynamic Host Configuration Protocol)

• Server (to manage IP addresses on local networks)

– Supports multiple IP address ranges on local networks

– User-defined lease duration

– Real-time status of active leases

• Client (to acquire the public-side IP address from service provider)

PPPoE (Point-to-Point Protocol over Ethernet)

• Client (to acquire the public-side IP address from service provider)

Routing

• TCP/IP (Transmission Control Protocol/Internet Protocol)

• Static routes

• RIP (Routing Internet Protocol: V1 and V2, and a combination of both)

• Separate RIP configuration for the private and public side

• RIP with authentication

• OSPF (Open Shortest Path First)

Unpack and Inspect the System

Each NetVanta 2000 Series is shipped in its own cardboard shipping carton. Open each carton carefully

and avoid deep penetration into the carton with sharp objects. After unpacking the unit, inspect it for

possible shipping damage. If the equipment has been damaged in transit, immediately file a claim with the

carrier and contact ADTRAN Customer Service (see Warranty and Customer Service on page 6).

Contents of ADTRAN Shipments

NetVanta 2050, NetVanta 2054, and

NetVanta 2100

Shipments of the NetVanta 2050, NetVanta 2054, and NetVanta 2100 include the following items:

•NetVanta unit

• ADTRAN OS Documentation CD

• Warranty Card

• AC adapter (ADTRAN P/N 336012 VUR01)

• Crossover Ethernet cable (ADTRAN P/N 8125M012) for connecting the NetVanta directly to a PC

NetVanta 2300 and NetVanta 2400

Shipments of the NetVanta 2300 and NetVanta 2400 include the following items: