User manual

61202295L1-1A © 2003 ADTRAN, Inc. 43
Chapter 6
Utility Menu
Use the U
TILITY
branch to view the unit’s software revision, to reinitialize the unit, to set system
parameters, and to restore factory default settings (see Figure 6-1).
Figure 6-1. Utility Menu Tree
SOFTWARE REV
Displays the current software revision level. This information is required when requesting assistance from
ADTRAN Customer Service or when updates are needed.
REINIT UNIT
Reinitializes the unit. Do not use this submenu to restore the factory default settings for all parameters;
instead, use the factory restore submenu (number 6).
ADDRESS
Displays and changes the unit address setting. To view the address navigate to this menu. To change the
address, highlight
A
DDRESS
and press E
NTER
. Then use the U
P
and D
OWN
arrow keys to change the digits.
After changing a digit, press
E
NTER
to move to the next digit. To skip a digit, press E
NTER
while the cursor
is blinking on that digit. Unit identification numbers must be between 0002 and 9999. See Figure 6-2 on
page 44.
1) SOFTWARE REV
2) REINIT UNIT
UTIL 3) ADDRESS
4) SET PASSCODE
5) KEYPAD
6) FACT RESTORE