User manual

TSU ACE User Manual Chapter 3 Operation
61202295L1-1A © 2003 ADTRAN, Inc. 29
EXAMPLE MENU OPERATIONS
The following examples show you how to select a main menu item and submenu item; how to set a data
field; how to view a data field and how to exit any menu or display.
Selecting a Main Menu Item
To select a main menu, perform the following steps:
1. Use the front panel
U
P
and D
OWN
arrows to place the cursor on a main menu item; in this example,
2) CONFIG. See Figure 3-4.
2. Press
E
NTER
.
The unit responds by displaying the first two available submenu fields (see Figure 3-5). The cursor
is on the first field. If there are more than two menu fields, a down arrow is visible on the lower
right corner. Use the front panel
D
OWN
arrow to access these.
Figure 3-4. Cursor on Menu Item
Figure 3-5. Submenu Fields
3. To exit out of a main menu, press C
ANCEL
.