User manual

Chapter 3 Operation TSU ACE User Manual
28 © 2003 ADTRAN, Inc. 61202295L1-1A
Util (Utility)
Use the U
TIL
menu to view and to set system parameters. (Also see Utility Menu on page 43.) This menu
includes the following submenus:
Test
Use the T
EST
menu to initiate different types of unit tests and to view test results which are displayed in the
LCD window. (Also see Test Menu on page 45.) The menu contains three submenus:
SOFTWARE REV
Displays the version number of the current software revision level. This
information is required when requesting assistance from ADTRAN Customer
Service or when updates are needed.
REINIT UNIT
Reinitializes the unit (runs a self-test). This menu does not restore the factory
default settings.
ADDRESS
Use to view and change the current unit address used for control-port access.
Acceptable addresses are 0002 through 9999.
SET PASSCODE
Use to set a passcode (also see Set Passcode on page 44).
KEYPAD
Use to lock the front panel keypad so that no accidental changes are made to the
menus. Enter the passcode to unlock the keypad (also see Set Passcode on page
44.).
FACT RESTORE
Restores factory default settings for all unit parameters.
NETWORK TESTS
Use to control the activation of loopbacks and the initiation of data test patterns.
RUN SELF TEST
Use to execute an internal self-test.
PORT TESTS
Use for testing the DTE (V.35) port.
Test execution disrupts some normal operations. See the individual test menu descriptions
before executing a test.