User manual

Chapter 2

Inspection and Installation

TSU ACE SHIPMENT

Inspecting for Damages

Carefully inspect the TSU ACE for any shipping damage. If damage is suspected, file a claim immediately

with the carrier and then contact ADTRAN Customer Service. If possible, keep the original shipping

container for use in shipping the TSU ACE back for repair or for verification of damage during shipment.

Shipping Contents

The following items are included in the ADTRAN shipment:

•TSUACE unit

• Power cable

• RJ-48 T1 Cable

•TSUACE CD

• Loopback plug

INSTALLING THE TSU ACE

Power Connection

Each TSU ACE unit comes with an eight-foot power cord, terminated by a three-prong plug which

connects to a grounded power receptacle.

Grounding Instructions

Grounding instruction information from the Underwriters' Laboratory UL 1950 3rd Edition is provided in

this section. An equipment grounding conductor that is not smaller in size than the ungrounded

branch-circuit supply conductors is to be installed as part of the circuit that supplies the product or system.

Customers must provide the DTE cable.

Power to the TSU ACE must be from a grounded 115 VAC, 60 Hz power source.