User manual

61202156L1-1 TDU 120e User Manual 8-1
Chapter 8
Remote/Management
Menus
The R
EMOTE
/M
ANAGEMENT
menu initiates telnet/terminal
sessions with remote devices and displays various
management information.
REMOTE MENU ACCESS
This menu displays telnet menus for a remote device (may be
another TSU/TDU or any other ADTRAN product that
supports telnet via its EIA-232 chain port). After selecting
this option, the user may choose to connect to a device
entered in the Unit Access Table or enter a unit ID for a unit
not in the Unit Access Table. Press CTRL + X to terminate the
session and return to the TDU 120e Main menu.
MANAGEMENT CONFIGURATION
This menu sets management information, such as SNMP
community names and trap destination addresses.
UNIT ACCESS TABLE
• This menu edits/creates the Unit Access Table.
• This table stores the Unit ID, Passcode, and Unit Type for
units connected via chain ports or connected remotely to
the TSU/TDU (see Figure 8-1 on page 8-2).
An entry in the table is required only to support proxy SNMP
MIB access or polling. For MIB access, an entry is required
only if the unit's passcode is not the same as the D
EFAULT
U
NIT
P
ASSCODE
, or the unit is a single port TSU Standalone.