User manual

Chapter 6. Utility Menu
6-4 TDU 120e User Manual 61202156L1-1
To Set the Unit Identification
In the U
NIT
ID menu under the UTIL menu, enter any value
between 2 and 999. The number 1 is reserved for the PC.
Pressing
Enter
records the Unit ID number and establishes its
availability for operation by remote control. The unit
proceeds to the S
ET
C
ONTROL
P
ORT
prompt.
No Unit ID Desired
Without entering any numbers at the U
NIT
ID prompt, press
Enter
. Pressing
Enter
with no Unit ID recorded establishes the
unit as not able to be operated by remote control.
Software Revision
This menu provides access to the display of the current
software revision level loaded into the base unit controller.
This information is required when requesting assistance from
ADTRAN Customer Service or when updates are needed.
Press
Escape
to exit.
Port Utility
This menu provides access to the display of the current soft-
ware information for each port installed in the unit. This
information is required when requesting assistance from
ADTRAN customer service or when updates are needed.
Ethernet Address
Displays the Ethernet Mac address for the 10BaseT port.