User manual

Chapter 5. Configuration Menu
5-14 TDU 120e User Manual 61202156L1-1
Copying Map
To copy Map A to Map B, copy Map A to the Temp Map; then
apply the Temp Map to Map B. See Figure 5-9.
Figure 5-9. DS0 Map Designations
Reviewing Maps
Selections 4 through 6 give a summary of the number of ports
assigned to Map A, Map B, and the Temp map, respectively.
The menu items and their descriptions are listed below.
Copy Map A (B) to Temp Map
Copies the current map A (B) into a TEMP map area. This
permits modification without disturbing the existing map.
When the modifications are completed, the TEMP map is
written to current Map A (B) by selecting A
PPLY
T
EMP
M
AP
TO
M
AP
A (B).
Create Temp Map
Creates a map by defining a port or Idle for all DS0s. When
C
REATE
T
EMP
M
AP
is first selected, all DS0s are set to Idle.
Possible port selections include IDLE, TST, + option module
ports. TST designates which DS0s are used for QRSS testing
when activated under the T
EST
menu. When not used for
testing, the TST designation is identical to IDLE.
TEMP
Map A
Map B
Selecting
A
PPLY
T
EMP
M
AP TO
M
AP
A(B)
will not disrupt the
operation of unmodified ports.