User manual

Chapter 5. Configuration Menu
5-12 TDU 120e User Manual 61202156L1-1
You can use the up and down arrows or number keys to
move the cursor from one selection to another. Press
Enter
to
perform the action displayed to the right of the cursor.
Creating a DSO Map
Map configuration involves these steps.
Initializing the Temp Map
Upon entering the DS0 maps configuration menu, the Temp
map reflects its last configured state.
Step Explanation
1
Intializes the Temp map to one of three configurations
(current Map A, current Map B, or all IDLES). This step
is optional.
2
Edits the Temp map so that it reflects the desired map
configuration.
3
Replaces the current DS0 map A or B configuration with
the Temp map configuration.
If you want to... Enter selections...
initialize the Temp map from its cur-
rent configuration to one which
reflects the currently stored Map A
or B configurations, respectively.
1 - 2
initialize the Temp map to an all
IDLE state.
3