User manual

Chapter 4. Status Menu
61202156L1-1 TDU 120e User Manual 4-5
DTE Status
An asterisk (*) indicates an active status of the following
lines:
• RTS - Request to send from DTE
• CTS - Clear to send to DTE
• DCD - Data carrier detect to DTE
• DSR -Data set ready to DTE
DTE Port Rate
The Port Rate displays the current setting of the Nx port.
Continue with standard operating procedures to exit the
display.
DBU Data/CNTRL
An asterisk (*) indicates an active status on the following
lines:
• TXD - Transmit data to the DCE
• RXD - Receive data from the DCE
• DCD - Data carrier detect from the DCE
• RI - Ring Indicate from the DCE
DBU Control
An asterisk (*) indicates an active status on the following
lines:
• RTS - Request to send the DCE
• CTS - Clear to send from the DCE
• DTR - Data terminal ready to the DCE
• DSR - Data set ready from the DCE
DBU Status
• DBU SECS - Total seconds in current DBU session
• IN DBU -YES/NO indication of active DBU status