User manual

Chapter 3. Operation
61202156L1-1 TDU 120e User Manual 3-11
ALTERNATE METHODS OF CONTROL
T-Watch Pro (ADTRAN PC Program)
T-Watch PRO is the ADTRAN PC control program. It
provides complete control over the configuration of the TDU
120e using a graphical interface. The T-Watch Pro program
displays the same status and performance data as the
terminal screen. This data is displayed in tables and graphs.
The T-Watch Pro program has the following capabilities:
• Interfaces with a modem which permits dialing into a
remote TDU 120e location to configure the unit or read
the status or performance of the unit.
• Receives traps from any TSU product.
• Records and creates display performance data over a 30
day period.
• Accesses units via the local area network.
Setting up the TDU 120e to Work Over a LAN
To set up the TDU 120e to work with T-Watch Pro over the
LAN, follow these steps:
Step Explanation
1
Set the Unit ID using the Terminal or Telnet. See Unit
ID
on page 6-3 for details.
2
Set control port interface to Normal (10BaseT) or
SLIP (chain-in port).
3
Configure the IP address, default gateway, and sub-
net mask.
4
Follow the installation instructions for T-Watch PRO to
start the program and connect to the unit.