User manual

Appendix A. SNMP
61202156L1-1 TDU 120e User Manual A-5
SNMP MIB Browser Configuration
The following steps are required to configure Network
Manager MIB variable access through the TDU 120e:
Step Action
1
Load the desired product MIBs on the network management
station.
For example :
If the administrator is managing TDU 120e and ISU 512 devic-
es, load TDU 120e.MIB, ISU512.MIB, and RFC1406.MIB.
2
Create device entries in the NMS database for all units that are
to be managed through the TDU 120e.
The host unit should be configured as the Proxy agent for the
external units. The IP address or host name used for the proxy
designation is that of the TDU 120e.
3
Set community names in the device’s entries for external units
to the TDU 120e community name with the device Unit ID ap-
pended.
See TDU 120e SNMP Access on page A-3 for more informa-
tion.
4
Set the device timeout for all device entries in the NMS device
database to five seconds, including the host unit.