User manual

Chapter 8. Remote/Management Menus
61202156L1-1 TDU 120e User Manual 8-5
Host 2 Trap IP Address
Defaults to 0.0.0.0. Second destination address for SNMP
traps.
Host 3 Trap IP Address
Defaults to 0.0.0.0. Third destination address for SNMP
traps.
Host 4 Trap IP Address
Defaults to 0.0.0.0. Fourth destination address for SNMP
traps.
System Name
A text string that can uniquely identify an SNMP managed
node. The System Name is displayed at the top of each menu
in telnet and terminal mode with the exception of the map
editing menu.
System Contact
A text string containing the name, phone number, etc. of the
individual responsible for maintaining an SNMP managed
node.
System Location
A text string describing the physical location of an SNMP
managed node (for example, SECOND FLOOR PBX ROOM).
Auth. Fail Traps Sent
(DISABLED, ENABLED: defaults to DISABLED)
When enabled, the TDU 120e issues an SNMP trap when any
SNMP request is received with an invalid community name.
Can be used for security purposes.
Poll Link Status Traps Sent
(DISABLED, ENABLED, defaults to DISABLED)
When enabled, the TDU 120e sends an SNMP trap whenever
a device configured to be polled fails to respond. When the
device begins responding to polls, a poll link-up trap is sent.
The format of the traps are defined in the agent MIB.
Ping IP Host
Allows the user to Ping a specific IP address.