User manual

Chapter 3. Operation
61200312L1-1 VCOM Module User Manual 3-3
MENU ACCESS
The ATLAS 550 system controller automatically detects the presence of the
VCOM Module as it is installed into the system. To access the VCOM
M
ODULE
menus and submenus, use thekeyboard arrow keys to scroll to the
appropriate row and column; then, press
Enter
on the keyboard.
M
ODULES
The following paragraphs describe the M
ODULES
menus of the ATLAS 550.
SLT
Read Security: 5
Displays the number of available slots in the ATLAS 550 chassis. S
LOT
0
referstotheATLAS550BaseUnit.
TYPE
Write Security: 3; Read Security: 5
Displaysthemoduletypecurrentlyinstalledintheslotorthemoduletype
you plan to install in the slot. If a VCO MModule is installed, theT
YPE
field
automatically defaults to VCOM (the VCOM Module). Alternatively, you
can use this field to preconfigure the system before installing a module by
specifying the module type that will be installed into each slot.
MENU
Read Security: 5
Displays additional status and configuration menus and submenus for var-
ious modules. To access the VCOM Module (VCOM), use the arrow keys to
scroll over to the M
ENU
column and down to VCOM;thenpress
Enter
.(A
discussion of the submenu items for this option begins with VCOM Menus
on page 3-5.)
ALARM
Read Security: 5
Indicates any alarm conditions on the VCOM Module. Press
Enter
in this
field to open the ALARM
menu.
TEST
Read Security: 5
Indicates when the VCOM Module is executing a test. Press
Enter
in this
field to open the TEST
menu.
Refer totheATLAS550User Manualfor detailed instructions on
navigating through the terminal menus.
If a module is installed, T
YPE
automatically displays the name of
the installed module. To change this name, set T
YPE
to E
MPTY
and
then select another module.