User manual

Chapter 3. Operation
3-2 E&M+ Dual Voice Option ModuleUser Manual 61200105L3-1A
Use the up and down arrows to place the cursor on the appropriate
item and press
Enter to display its first two submenu choices.
Figure 3-1. TSU 100 Main Menu
E&M+ MENU ITEMS
The E&M+ voice module menu items are accessed from, and
operate the same as, menus for the TSU 100/120/600. The E&M+
items are submenu choices of the TSU 100/120/600 four main
menus, as shown in Figure 3-1 on page 3-2. For information on
F
ACTORY RESTORE and RUN SELF TEST see TSU Features Used
with E&M+ Options on page 3-10. The E&M+ menu items include
the following:
• PORT STATUS
• PORT CONFIGURATION
• PORT UTILITY
• PORT TEST
1) NI PERF RPTS
1) STATUS 2) NI ERRORS
3) ACTIVE ALARMS
1) NETWORK (NI) 4) VIEW HISTORY
2) CONFIG 2) UNIT 5) PORT STATUS
3) MAP XCHNG 6) REMOTE PORT
4) MAP IN USE (A) (B) 7) CLEAR PORT ALM
5) DS0 MAP A 8) ENET STATUS
6) DS0 MAP B
TSU 100 7) PORT CONFIG
Main Menu 1) TIME/DATE
3) UTIL 2) FACT RESTORE
3) SET PASSCODE
1) NETWORK TESTS 4) UNIT ID
4) TEST 2) RUN SELFTEST 5) PORT UTILITY
3) PORT TEST 6) SOFTWARE REV
4) CANCEL TESTS 7) ENET ADDRESS
8) SERIAL NUMBER
Code Rev “J” 9) CMD MODE
Boot Rev “B” 10) RST TEL PASS