User manual

Chapter 3. Operation
61200.080L1-1 FXS+ Dual Voice Option Module 17
PORT CONFIG (Port Configuration)
Port Configuration, a submenu of TSU 100/600 main
menu item Configuration, is used to configure the FXS+
option module. The following submenu items are used
to configure the parameters:
• MODE
• RX LVL (TLP)
• TX LVL (TLP)
• FAULT RESP
• TANDM OPTIONS
- Supervision
- Dial Tone
- Loop Rev Bat
- Ring Back
When Port Configuration is displayed, place the cursor
on it and press Enter to activate. Scroll to display the
port to be configured and activate with Enter. See
Figure 3-5.
The unit displays the first of five submenu items. Table
3-A identifies the available selections for Port Configura-
tion. Continue with standard operating procedures.
Figure 3-5
Port Configuration Submenus
2)CONFIG
7)PORT CONFIG
1)MODE
2)RX LVL (TLP)
3)TX LVL (TLP)
4)FAULT RESP
5)TANDM OPTIONS
1.2 FXS+