User`s manual

http://www.adtechcn.com 32
adt8840a_Disable_ADT834INT
Disable interruption service for motion
control
50
adt8840a_reset_fifo Reset buffer 50
adt8840a_read_fifo Get buffer status 50
adt8840a_fifo_inp_move1
1-axis hardware buffer interpolation
(software buffer)
51
adt8840a_fifo_inp_move2
2-axis hardware buffer interpolation
(software buffer)
52
adt8840a_fifo_inp_move3
3-axis hardware buffer interpolation
(software buffer)
52
Hardware
buffer
interpolation
adt8840a_fifo_inp_move4
4-axis hardware buffer interpolation
(software buffer)
52
adt8840a_FS_Remove Delete file 53
adt8840a_Net_Setup Network configuration for control card 53
adt8840a_set_speed_mode Set speed mode 53
adt8840a_set_buff_mode Set software buffer mode 54
adt8840a_set_pulsemm Set pulse equivalent 54
adt8840a_get_pulsemm Get pulse equivalent 54
adt8840a_upload_sysfile
Upload parameters of system
configuration files
55
adt8840a_download_sysfile
Download parameters of system
configuration to control card
55
adt8840a_go_home
Function for returning to home position
(software buffer)
56
System
adt8840a_stop_all Stop all machining 56
adt8840a_download_gfile
Download G-code program to control
card
56
adt8840a_upload_gfile
Open and upload G-code program files
in control card
57
adt8840a_g_code G-code command 57
adt8840a_run_gfile Run G-code files for machining 57
G Code
adt8840a_g_status
Query the machining status where
G-code files are run
58
adt8840a_get_gbuff_depth
Query buffer depth of G command 58
G codes supported by ADT-8840
Type G code Definition Format Remarks
G00(G0) Inching G00X_Y_Z_W_ Select X, Y, Z or W Motion
G01(G1)
Linear
interpolation
G90 G01X_Y_
G91 G01X_Z_
Linear interpolation for
any two axes or three axes