User`s manual

ADT-8840 Four-Axis Off-Line Motion Control Card Users Manual
http://www.adtechcn.com 1
Declaration on Copyright
The copyright of all parts in this Manual is reserved by ADTECH (SHENZHEN)
CNC TECHNOLOGY CO. LTD (hereinafter referred to as “ADTECH”) and, without
permission by ADTECH, nobody shall reproduce, copy, transcribe or translate any
part therein. No part of this Manual shall be considered as warranty, expression of
standpoint or other implications in any form whatsoever. If any information is
disclosed, either directly or indirectly, any profit is lost or undertaking is terminated
just because of the information indicated in this Manual or on the product it describes,
ADTECH and its employees shall bear no responsibility. In addition, the
specifications and other materials mentioned in this Manual shall only be used for
reference and the contents therein shall be subject to change without prior notice.
Trademark
The product names are only mentioned in this Manual for the purpose of identification,
which may be the trademark of others or whose copyright is reserved by others. We
hereby declare that:
INTEL and PENTIUM are the trademarks of Intel Corporation;
WINDOWS and MS—DOS are trademarks of Microsoft Corporation;
ADT-8840 is the trademark of ADTECH;
Marks not mentioned here belong to their respective companies that
underwent the registration procedures.
All rights reserved.
ADTECH (SHENZHEN) CNC TECHNOLOGY CO. LTD