User`s manual

http://www.adtechcn.com 99
interface saying the control card must be re-started to make the configuration effective.
After the control card is restarted, in the power-on information the user will find “find network
configuration files, configuration is under way…”, as shown in Figure 6.
Figure 6
The network configuration of ADT-8840 can also be realized through the function
“adt8840a_Net_Setup()”in the application after the network is successfully connected.
) 4. Network configuration of host (upper PC)
The network configuration of the controlling host should be modified through the dialogue box of
properties designed for TCP/IP protocol, which can be opened under Windows environment by
following the procedures below:
From Start menu or on the desktop, make selections by following items below: right click
Network Neighborhood->Properties->click network connection window->right click local area
connection and click properties->open the properties window->activate the general
options->select Internet Protocol (TCP/IP)->click properties, and you will open the properties