User manual

ADT-HC4500 CNC Flame/Plasma Controller
81
any content following. It works until the next G20 or G21 instruction is detected.
3.3. G00 idle motion
This instruction enables you to travel to the appointed position quickly. During the travel, the system
moves from the starting point to end point in rectilinear motion at the manual limiting speed. It would not
be influenced by the speed rate.
Format: G00 Xn Yn
For example: G92 X0 Y0
G00 X75 Y75
M02
Current position of cutting gun
Expected position of cutting gun
3.4. G01 linear cutting
This instruction enables you to feed the cutting gun to the appointed position in linear way. As the
cutting motion instruction, single-axis or dual-axis linear interpolation is available.
Format: G01 Xn Yn
For example:
G92 X0 Y0
G00 X100 Y50
G01 X30 Y90
M02
Current position of cutting gun
Expected position of cutting gun
3.5. G02/G03 circular arc cutting
This instruction is used to cut a circle or circular arc. The circle is divided into G02 (clockwise) and G03
(anti-clockwise).
Format: G02 [03] In
For example (G02):
G92 X0 Y0
G00 X55 Y55
G02 I35