User manual
ADT-HC4500 CNC Flame/Plasma Controller
76
press [ESC] to exit the communication connecting.
6.6.6 Enter the setting interface of BIOS
Use [Y+] or [Y-] to move the cursor to “B. Setting BIOS”, press [ENTER]; then, move the cursor to
“2. Upgrade PRG” with [X+] or [X-], and press [ENTER] again. The system will give a prompt “Do you
really want to upgrade the program, Y/N?” press [ENTER] to confirm. After that, the system will prompt the
files are found and are refreshing. As the upgrade completes, the system will prompt “Upgrade complete,
please restart the machine”. Shut the power supply and restart the controller.
7. Help system
To help your operations, a help system is provided:
1) You can press [INS] key in any interface to enable the help system of the interface, which provides the
basic operations and notes.
2) You can press [F6] in upgrade interface to enter the main help system as Picture 7.1, in which you can
search for some basic help contents. You can input the content and press [F5] to start searching. The
system will highlight the first searched content. You can also do not input the searching content, in
this way, the system will read the help file from the beginning.
Note: The content of help system includes G code, M code, common instructions, etc. that are
easily to be forgotten.
3) You can press [pgup↑] or [pgdn↓] to page up/down, [
] or [ ] to exit the help system and return to
the current interface.