User manual
ADT-HC4500 CNC Flame/Plasma Controller
73
6.5 Recording program
When you have copied the latest application software to controller, you need to save the software
to the controller BIOS so that the controller can operate the software. To do this, you should cut the
controller power supply first, press and hold [ESC] key when the controller is restarted. The interface
will ask you to input the password as follows:
6.6.1 Password entry interface for entering the BIOS interface
Input correct password to enter the following interface. Refer to supplier for the password.
6.6.2 Setting interface for entering BIOS interface