User manual
ADT-HC4500 CNC Flame/Plasma Controller
52
Picture 3.2.1.2 Error code detection interface
In case of the interface as above picture, press [ENTER] and the cursor will stop at the error code line,
and you can then modify the error character line. After the modification, you can press [F2] to test the
processing file, while the system will pop up the following dialogue box:
Picture 3.2.1.2.1 Code re-testing interface
In the above interface, press [ENTER] to re-test from the first line, and when you press [ESC], the system
will test beginning from the cursor.