User manual

ADT-HC4500 CNC Flame/Plasma Controller
32
Picture 3.1.1 Pause in auto mode
Processing in pause (displacement perforating and gun changing)
Picture 3.1.1.2 Pause processing
During the cutting, if [Pause] is pressed, according to whether the cutting gun has been moved manually,
there are the following treatments:
1) If there is no manual movement after the pause, the controller will start perforating once you
press the [Start] button, and then proceed running the program.
2) After the pause, if the cutting gun is moved deviating from the running track of processing
file, when you press the [Start] button, the interface as Picture above will show up.
[1]. the controller travels back to where the processing program pauses, enables the cutting