User manual

ADT-HC4500 CNC Flame/Plasma Controller
25
Picture 2.17.1 Before X mirroring
Picture 2.17.2 After X mirroring
18. Rotation
Sometimes, the position and angle of the steel plate are required to meet the XY axis of the cutting
machine during the cutting. However, in the actual processing, it is hard to avoid the XY axes on steel
plate deviating from the XY axes of cutting machine for an angle.
In virtue of rotation function, it is allowed to achieve the auto calibration of steel plate so that you do not
have to move the steel plate or cutting machine. The operations are as: in main menu, press [F1] (Auto)
[F4] (Figure) [F4] (Process) [F1] (Rotate) [F4] (Rotate), and then input the rotation parameter to
finish the figure rotation.