User manual

ADT-HC4500 CNC Flame/Plasma Controller
17
2. [AddSpeed]-- Acceleration: It is an average increment of increasing the processing speed from start-up
speed to the highest speed. For example, if the start-up speed is 300, acceleration is 100, and highest
speed is 1000, then, the speed is increased to 300, 400, 500…1000 at 100 intervals; if the acceleration is
50, then, the speed is increased by 50 each time.
The acceleration is determined by the
Precision (In main menu, press [F4] (Para) [F5] (Prec).
Precision: refer to the distance the corresponding machine moves when the control system gives an
impulse.
The following list shows the reference value of impulse equivalent and the acceleration; the actual data
are subject to the on-scene cutting effect.
Precision Addeleration (mm/minute)
0.001000-0.002000 10
0.002000-0.003000 20
0.003000-0.004000 30
0.004000-0.005000 40
0.005000-0.006000 50
0.006000-0.007000 60
0.007000-0.008000 70
0.008000-0.009000 80
0.009000-0.010000 90
0.010000-0.011000 100
0.011000-0.012000 110
0.012000-0.013000 120
Table 2.8.2
9. Adjustment of preheating time in flame cutting [Adju]
In main menu, press [F4] (Para) [F4] (Ctrl) to set the “Preheat Delay” in the second row as the
required time.