User manual
ADT-HC4500 CNC Flame/Plasma Controller
11
Main menu →Press [F6] to enter the upgrade interface →Press [F6] (Help) to search for the
relevant help information.
2. Restore factory default
In case there is a condition of abnormal speed or accuracy due to the improper adjustment of system
parameters, you can, in main menu of system, press [F6] (Upgd) →Press [F1] (LEV)→Press [F1]
(LEV)→Press [ENTER] to restore the parameters to factory default.
In HC4500, you can also press [F6] (Upgrade) in main menu→ [F3] (Restore) →Press [F1]
(Restore)→Press [ENTER] to restore the system configuration files, help files, and figure library files.
Note: If the factory has not saved the factory default, it is not allowed to restore the parameters,
and the corresponding dialogue box will be shown.
Picture 2.2 Parameter revert
It can refer to the chape 3 system details operation and specification (6.2) Revert fucntion
3. Figure library
For the convenience of processing and for reducing workload of operators and increasing the usability of
system, the system is provided with 33 common figures of processing part and 1 testing figure. In the main
menu interface, press [F2] (Grap) to enter the figure library interface as follows, and select the corresponding
figure to process.