User manual

ADT-HC4500 CNC Flame/Plasma Controller
115
Annex IV M Instruction Quick Reference
S/N Name of Instruction Explanation
1 M02 Program ends
2 M07 Start the fixed cycle of preheating and perforating
3 M08 Close the fixed cycle of cutting oxygen (plasma arcing)
4 M10/M11 Switch of acetylene valve, M10 (Open), M11 (Closed)
5 M12/M13 Switch of cutting oxygen valve (switch of plasma arcing), M12 (Open), M13 (Closed)
6 M14/M15 switch for controlling the rise of cutting gun, M14 (Open), M15 (Closed)
7 M20/M21 ignition switch, M20 (Open), M21 (Closed)
8 M24/M25 switch of preheating oxygen valve, M24 (Open), M25 (Closed)
9 M52 ignition fixed cycle (controlled by time in “Control” interface)
10 M70 fixed cycle of cutting gun rising (controlled by time in “Control” interface)
11 M71 fixed cycle of cutting gun falling (controlled by time in “Control” interface)
12 M72 fixed cycle of perforating cutting gun rising (controlled by time in “Control” interface)
13 M73 fixed cycle of perforating cutting gun falling (controlled by time in “Control” interface)
14 M74 fixed cycle of preheating (controlled by time in “Control” interface)
15 M16 switch for controlling the falling of cutting gun, M16 (Open), M17 (Closed)
16 M80 main switch, all output ports are closed if M80 is performed