User manual

ADT-HC4500 CNC Flame/Plasma Controller
114
Annex III G Instruction Quick Reference
S/N Name of Instruction Explanation
1 G00 Quick positioning motion (Dry run)
2 G01 Linear processing
3 G02 Clockwise circle processing
4 G03 Anti-clockwise circle processing
5 G04 Pause/Delay
6 G26 X axis returns to reference point
7 G27 Y axis returns to reference point
8 G28 X and Y axes return to reference point at the same time
9 G22 Cycle starts (should be used combining G80)
10 G80 Cycle ends (should be used combining G22)
11 G81 Counting function
12 G40 Cancel cutting gap compensation
13 G41 Left compensation
14 G42 Right compensation
15 G92 Set the reference point of processing