User manual
ADT-HC4500 CNC Flame/Plasma Controller
109
2. Square
Relative coordinates programming and explanation of graph codes:
0000: G92 X0 Y0
0001: G41——Left compensation
0002: M07——Perforating;
0003: G01 X50 Y50——Perforation and wire bonding;
0004: Y50——the first side, if the above instruction is G01, this G01 as well as X0 of this
instruction cannot omitted for the convenience of editing codes
manually.
0005: X50——the second side;
0006: Y-50——the third side;
0007: X-50——the four side;
0008: M08——close the cutting oxygen
0009: G40——Finish the compensation
0010: G28——travel to the origin at the highest manual speed;
0011: M02——processing ends