Programming instructions

ADT-CNC4620 Programming Manual
- 43 -
M03 S500T0101
G00 X25Z10
M03S550F3000
G71U0.5R0.5
G71P10Q20U0.2W0.2
N10G0X0Z0F300
G2X5Z-2.5R2.5F200
G1W-1.25F300
G2X10W-2.5R2.5F200
G1W-2.5F300
N20X15W-2.5
G70P10Q20
G0X20
Z0
M30
%
3.6.2. Radial roughing cycle G72
Instruction format: G72 W( d△ ) R(e) F_ S_ T_
G72 P(ns) Q(nf) U( u△ ) W( w△ )
W( d): the single tool feed of Z axis during roughing (unsigned, unit: mm)△
R(e): the single tool retreating of Z axis during roughing (unsigned, unit: mm)
P (ns): start block line of finishing track
Q(nf): end block line of finishing track
U( u): reserved finishing amount of X axis, unsigned△
W( w): reserved finishing amount of Z axis, unsigned△
F: cutting feeding speed during roughing
S: principal axis rotation
T: tool No., tool offset No.