Programming instructions

ADT-CNC4620 Programming Manual

- 22 -

G03 Arc interpolation (CCW)

G32 Thread cutting

G90 Axial cutting cycle

G33

Z axis taping cycle

G92 Thread cutting cycle

G94 Radial cutting cycle

G04 Pause, quasi stop

G31 Jump instruction

G27 Reference point returns

checking instruction

G28 Return to mechanical home

G29 Return instruction from the

reference point

G30 Return to second reference

point instruction

G50 Coordimate system setting

G70 Finishing cycle

G71 Axis roughing cycle

G72 Radial roughing cycle

G73 Closed cutting cycle

G74 Axial grooving multi-cycle

G75

Radial grooving multi-cycle

Non-modal G

instruction

G96 Constant line speed on Modal G instruction

G97

Constant line speed off Initial G instruction

G98 Feeding every minute Initial G instruction

G99

Feeding every revolution Modal G instruction

3.2. Interpolation function

3.2.1. Fast moving G00

Instruction format: G00 X(U)Z(W);

Instruction function: X axis and Z axis move to the end point simultaneously from the

start point at the fast moving speed respectively. G00 is initial G instruction.

The two axes move at independent speed respectively. Set the fast moving speed

of X axis and Z axis through comprehensive parameter 009 and 011. The synthetic

track isn’t straight line necessarily, and it should be noted that the two axes may not