User manual

ADT-TP3340DJ Three-axis Dispenser
- 17 -
1) Preview: Select a point in the graph interface.
2) Copy (matrix): Copy certain part of the graph in matrix mode.
The graph after copied in matrix mode follows:
After copying, you can also modify certain points separately.
Insert/ Instruction/ Delete/ Save/ Other
Type: X coordinates; Y coordinates; Z coordinates; Speed: More
Start point
Linear
Forward circle
End point
Line: 0004/0004 Prompt: Gun closed
Up Down Copy Preview Back
Magnification:0.94
Zoom in
Zoom out
Suitable
Left
Right
Up
Down
Point No.:0004 Previous point: Next point: Select Back
X direction group number:
X direction spacing:
Y direction spacing:
Y direction group number:
Copy range: Start line: End line
Magnification:0.94
Zoom in
Zoom out
Suitable
Left
Right
Up
Down
Point No.:0004 Previous point: Next point: Select Back
Instruction space
Prior offset axis: X Z shape or S shape: S
Inserting mode: Append to the end OK Cancel