User manual
ADT-TP3340DJ Three-axis Dispenser
- 16 -
加工点切换按钮
手动高低速
切换按钮
电机手动控制按钮
实时坐标显示
在当前位置插入一个加工点
删除当前加工点
修正一批加工点的坐标
将当前坐标保存
到当前加工点中
将当前Z轴坐标保存
为当前加工点针高
切换到列表视图
加工点各项参数显示
运动到当前加工点
和下一个加工点
No.: Display the number of current processing point, counting from 1.
Type: Display the type of processing point. For the description of specific type, please refer to
the details of every processing point type.
X, Y, Z coordinates: Display the coordinates of current processing point.
Speed: Display the speed of current processing point. 0% corresponds to the start speed and
100% corresponds to the processing speed. If the glue gun isn’t opened, the processing speed is the
space shift speed. If the glue gun is opened, the processing speed is the dispensing speed.
Single point time: This option is only available for “single point” processing, i.e. the time from
opening the glue gun to closing, used to adjust the glue output of single point dispensing.
Needle height: This option is available for “Single point”, “End point” and “Ellipse parameter”,
i.e. the height lifted when the glue gun is closed.
Set coordinates: Save current XYZ coordinates in the XYZ coordinates parameter of current
point. To save the coordinates of certain axis separately, press and hold the data entry box of the axis
for at least one second.
Set needle height: Save current Z-axis coordinates into the “Needle height” parameter of current
point.
GoHere: The motor goes to current point directly.
GoNext: The motor goes to next point directly.
List: Switch to list view.
Insert: Insert a processing point before current point.
Delete: Delete current processing point.
Modify: Modify the coordinates of processing points with the error between the coordinates of
current processing point and actual current coordinates as the offset.
Save: Save the modification of current file.
Exit: Exit to main interface.
2. List view
N
o. Type X coordinates Y coordinates Z coordinates
Single point time:
Start point
Speed:
N
eedle
hei
g
ht:
Low speed
Total points:
Set coordinates Set needle height Go Here GoNext List
Insert Delete Modify Save Exit
Processing point switch
button
Manual high/low speed
switch button
Save current coordinates in
current processing point
Save current Z-axis coordinates as the
needle height of current processing point
Insert a processing point into current
p
osition
Modify the coordinates of a batch o
f
p
rocessing points
Delete current processing
p
oin
t
Display the parameters o
f
p
rocessing poin
t
Real-time coordinates display
Switch to list view
Move to current
p
rocessing point and
next processing point
Manual motor control button